CSSL MINIMUM EMPLOYMENT CONDITIONS.
Following is a summary of the conditions and parameters required to employ a CSSL.
Material Handling Equipment. A 10,000 lbs lifting and moving device (i.e., forklift, etc.) is required to unload and
position the packed CSSL container.
Area Characteristics and Dimensions. A level area of approximately 2,000 square feet is required. The ground must
be free of obstacles and vegetation (trees, brush, etc.) so that the container sits firmly on the ground. If the 3,000 gallon
freshwater or wastewater tanks are used, vehicular access is required. The employment area elevation should not
exceed 7,000 ft (2128 Meters)
Power Requirements. The CSSL requires 100 AMP, 208 VAC, 3 Phase power. This can be provided through a
commercial hookup, or through use of a generator (30 KW minimum). Only a qualified civilian or military (MOS 51R,
52C, 52D, or 52G) personnel must make the power connection.
Utility Requirements. A freshwater source supplying a maximum 8,700 gallons per 20-hour period (Consumption at
full use) is required. The source should be either a municipal water system or another approved freshwater water
Wastewater Disposal. A wastewater disposal site must be available in the form of a municipal sewage system, or
other approved site where the wastewater collected in the 3,000 Gallon wastewater tank can be evacuated.
Water Service. If 3,000 Gallon tanks are used for fresh and/or wastewater, water supply trucks (or service) and/or
wastewater pumping tank trucks (or service) are required. Approximately three supply and collection round trips are
required per day to keep the CSSL in full operation.
END OF WORK PACKAGE
0003 00-5/(6 Blank)