TM 10-3510-224-13&P
0005 00
WARNING
The CSSL components are heavy. To avoid injuries, four persons are required to
perform this procedure.
To shut down the facility while it remains in place proceed as follows:
Ensure washer/dryers have completed their cycle.
Using Municipal Water:
1. Shut off the fresh water supply at the source. Disconnect the 2 freshwater hose (1) from the source and from the
fitting on the freshwater panel (2) on the utility wall of the container. Drain the hose, coil it, and set it aside.
2. Connect the garden hose (3) to the hose fitting (4) located at the end of the supply line (behind washer/dryer #6)
and open (handle in line with water line) the ball valve (5) to let the system drain.
3. After the supply line has drained, disconnect the garden hose, drain it, coil it, connect the ends together and set it
aside. Leave the ball valve (5) open (handle in line with water line).
3
5
4
1
2
0005 00-38