Table 1. Plumbing Troubleshooting Procedures for Containerized Batch Laundry.
TEST OR INSPECTION
Replenish water supply. Ensure
Ensure water supply (Figure 1, Item 1)
1. No source water to CBL
water supply valves are open.
is sufficient and available.
Ensure water supply and water
supply hoses are not frozen.
Set valves IAW TM 10-3510-226-
Check valve setup.
Ensure P-1 pump is operating.
Check Pump P-1 (Figure 1, Item 2).
Note that the pump may be cycled
off due to sufficient or high system
pressure by either the pressure
switch or the PLC. Prime pump if
necessary IAW TM 10-3510-226-
If further corrective action is
required, notify direct support
Figure 1. No Source Water to CBL.