TM 10-3510-226-23
UNIT MAINTENANCE
CONTAINERIZED BATCH LAUNDRY
WASHER DRIVE BELTS
INSPECT, ADJUST, REPLACE
INITIAL SETUP
Tools
Personnel Required
Tool Kit, General Mechanics: Automotive (WP
Quartermaster and Chemical Equipment Repairer 63J
(2)
Materials/Parts
Equipment Condition
None Required
CBL set up
References
INSPECT
Inspect the Washer Drive Belts
WARNING
Ensure that washer electrical power is shut off and disconnected before proceeding. The
Circuit Breaker box should be locked by personne following this procedure. Serious
injury or death can result from electrocution if proper safety precautions are not observed.
WARNING
The washer is extremely heavy. Use caution when lifting and blocking the washer, and
do not allow unnecessary personnel in the immediate area while it is being moved.
Serious injury or death may result if safety precautions are not observed.
CAUTION
The washer is a large, heavy piece of machinery being moved out of a confined space.
Before removal and installation, remove or protect any equipment which might be
damaged by the washer on its way in or out.
2. Inspect belt (Figure 1, Item 1) for physical damage such as fraying and wear.
3. Ensure belt deflection is approximately inch.