2-18. PREPARATION FOR MOVEMENT - continued
Disassembly of Button Sewing Machine - continued.
Remove belt (11) from the motor under the
table by tilting the machine head (8) back
lowering the pulley and removing the belt
Remove the light assembly (10) from the
table top (5) by loosing the thumbscrew on
the bottom of the clamp. Stow the light
assembly in box No. 2.
When sliding the button machine tray, do not
allow needle bar to hit the bottom of the
Carefully remove machine head (8) with belt and install in the tray marked 261-2. The pulley on
the machine head (8) should be on the back of the tray. Secure with strap. Slide tray into unit
where marked 261-2.
Disconnect chain (7) from the pedal and the hook/lever inside the machine base (4). Stow chain
(7) in stowage box No. 4.
Remove four machine screws (6) and machine base (4) from table (5). Stow machine base (4) in
box No. 1.