TM 10-3530-207-14
4-32. CLOTHING SEWING MACHINE STAND ASSEMBLY MAINTENANCE-continued.
Assembly.
(1)
Install base (1) onto the lower left leg (2) and the lower right leg (3). Secure with two bolts (4), two flat
washers (5) and two square nuts (6).
(2)
Install the pipe support (7) onto the lower left leg (2). Secure with bolt (8), two flat washers (9), lock
washer (10) and a square nut (11).
(3)
Install the pipe support (7) onto the lower right leg (3). Secure with bolt (8), two flat washers (9), lock
washer (10) and a square nut (11).
(4)
Slide and install the treadle support (12) through both pipe supports (7). Position the lower left leg
assembly (2) and the lower right leg assembly (3) and the ends of the pipe.
(5)
Install four folding clips (13). Secure with four bolts (14), four flat washers (15), four lock washers (16)
and four wing nuts (17).
4-73