4-58. HEAT SEALER CONSOLE MAINTENANCE - continued.
Remove four panel screws (1) and two cover screws (2) from the back console panel (3).
Tag two wires at switch (4), then gently pull off wires from the circuit breaker (4) back.
Push circuit breaker (4) locking tabs into the circuit breaker assembly, then pull circuit
breaker (4) out from the front of console assembly.
One wire from each light ties together at crimped terminal ring.
Tag and identify wires on the green light (5) and red light (6).
Remove the three ring terminals (7) from the terminal studs inside the console assembly.
If lights are to be removed, then cut off the ring terminals (7) from the lights.
Fold mounting tabs on light lens so that the green light (5) and the red light (6) can be removed
out the front of the console assembly.
Remove set screw (8) and potentiometer knob (9).