4-58. HEAT SEALER CONSOLE MAINTENANCE - continued.
Wipe parts with a wiping rag (Appendix F, Item 2).
Inspect hardware for damage.
Inspect electrical parts damage.
Inspect for missing back panel console
Repair is limited to the replacement of defective components with serviceable ones.
Install potentiometer knob (1). Secure with setscrew (2).
Insert the red light (3) into the bottom hole and the green light (4) into the top hole.
Strip light wires and crimp ring terminals (5) onto the light wires.
Connect light wires to proper studs as previously marked or tagged.
Install circuit breaker (6) into the console assembly.
Attach wires to the circuit breaker (6) terminals as previously marked or tagged.
Install back console (7) into the console assembly. Secure with panel, four panel screws (8)
and two cover screws (9).