5-11. HEAT SEALER MOUNTING PLATE MAINTENANCE.
This task covers:
INITIAL SETUP :
Equipment Condition :
General Mechanics Tool Kit (Appendix B,
Heat sealer removed from compartment (para 2-8).
Drill, (Electric or Pneumatic)
Set, Drill Bits
Riveting Tool Set (Appendix B, Item 4)
Inspect for missing or damaged hardware.
Inspect for missing or damaged straps.
Inspect for spinning blind nut.
Repair. Repair is limited to the following:
Replacement of blind nuts.
Drill out and remove damaged.
blind nuts (1).
Install a new blind nut (1) Into
Replacement of straps.
Remove two blind rivets (1) and
Separate retainer (3) from strap
Repeat above steps for other