SECTION II EQUIPMENT DESCRIPTION AND DATA
CHARACTERISTICS, CAPABILITIES, AND FRATURES.
1.9.1. The Keco model SHOWER-1 is made up of six two -person shower stalls. Each shower stall base uses
a frame assembly, with shower heads attached, to support a cover assembly. The six shower stalls strips are
joined to make a 12 person walk-through shower facility. Door panels, secured using hook-and-pile fasteners
strips, are provided on the two open ends of the facility.
1.9.2. Water supply and draining is provided by an electric pump assembly.
1.9.3. Typical installation of the portable shower module is inside a temper tent with four three-person shave
stands. Heated water for the portable shower module and shave stands is provided by a portable hot water
1.9.4. The portable shower module is limited to use only in environments where the ambient air temperature
is above 32degrees Fahrenheit (0 degrees centigrade).
1.10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. Refer to Figure 1-2.
Shower Stall (1).
Pump Assembly (2).
Hoses and Fittings (3).