Shut down Procedures.
a. Shut-down the portable hot water system. Refer to technical manual covering the portable hot water
system to find specific operating procedures.
b. Place both pump assembly switches to the OFF position and de-energize power source.
c. If connected to a closed water supply, close water supply valve.
d. Open a shower nozzle valve to relieve system pressure. Close valve when water stops flowing
SECTION IV OPERATION UNDER UNUSUAL CONDITIONS
The portable shower module is typically installed inside a temper tent and is therefore not subjected to any
unusual operating conditions. It should be noted that the portable shower module is limited to use in
environments where the ambient air temperature is above 32 degrees F. (0 degrees C).