30. Install the ratchet assemblies on the 2-inch straps.
31. Place the M-80 water heater (7) on top of the mounting platform (8).
The M-80 must be securely strapped to the equipment mounting platform before any
other packing is performed. The M-80 must not be able to move when strapped down.
32. Attach the ends of the 2-inch straps together and tighten.
33. Place the 30 gpm water pump (9) on the equipment mounting platform, centered between the two
34. Attach a 2-inch strap to the padeyes and tighten over the 30 gpm water pump.
35. Close and latch the container service doors.
36. Close and latch the container personnel doors.