Table 1. Water Troubleshooting Procedures-Continued.
TEST OR INSPECTION
(Re)connect discharge hose as
3. GRAYWATER IS NOT
Step 1. Ensure graywater
discharge hose is properly
or 0006 00 as applicable.
connected to the discharge fitting
on the water service panel of the
Straighten kinks in hose and
Step 2. Check for kinks or sharp
ensure hose is not elevated
bends in the graywater hose and
higher that the water service
ensure the end of the hose is
panel at any point. Ensure that
located lower than the water
end of drain hose is located lower
service panel. Ensure the shower
than the water service panel at
container is level.
the shower container.
If condition persists, notify Unit