Four people are required to lift the ECU. Serious injury to personnel could result from
improper lifting. A forklift should be used, if available.
3. Pick up ECU (4) and carry to rear of container. Carefully place ECU (4) on the ECU panel (2),
ensuring that power cord is not damaged and that the cord is placed inside the container through the
4. Slide ECU (4) onto panel (2) until four or five inches of the ECU (4) overhangs the end of the
5. Have person inside container adjust ECU (4) forward or backward until front of ECU (4) is flush with
6. Inside the container, install the faceplate (5) and plug the ECU power cord (6) into the marked outlet