Table 4. Hot Water Troubleshooting Procedures.
TEST OR INSPECTION
1. NO HOT WATER
Step 1. Check water heater
circuit breaker (#8, CL or #2B
CLS) (1) and ensure it has not
Ensure that water heater is full of
water prior to turning power ON.
Failure to do so will damage the
Reset breaker by setting to the
OFF position, then to the ON
Turn valve ON (inline).
Step 2. Check water valve (2).
If water valve is closed or pump
has been left on with no water in
system, notify Unit Maintenance.
Notify Unit Maintenance.
Containerized Latrine System