Inspect the Bag Heater Assembly
Before removing heater from water tank, ensure the heating element has had at least 15
minutes to cool off from the time it was unplugged. Failure to do so may cause serious
injury to personnel.
1. Ensure bag heater assembly is unplugged.
2. Inspect the bag heater assembly (1) for physical damage such as cut insulation, exposed wiring,
bent/missing prongs (hot, neutral, ground) or broken guard wires (2), or visible signs of electrical
malfunction, such as pitting on the element (3).
3. Replace an unserviceable bag heater assembly (1).