Replace the Gender Sign Snap Tight Fastener
When gender signs and retainers for the CL are no longer serviceable and must be
replaced, the signs and retainers are to be replaced with those used on the CLS, as
pictured in this work package.
Gender sign retainers may have been fastened with rivets. If so, the rivets must be
drilled out, and sheet metal screws procured to fasten the replacement sign.
1. Remove the screws (1) securing the sign retainer (2), and remove the retainer.
2. Install the retainer (2), and secure with screws (1).
END OF WORK PACKAGE
0040 00-3/(4 Blank)