Figure 55. Bracing doorway area.
Figure 56. Detail of K brace
Under no condition should second or subsequent layers be
a. General Information.
rigidly braced when the floor layer is tied as a floating load.
Bilge protection must be used in this method of loading and is
(1) As in all other cases, cars should be
applied in the form of gates located at each end of the unit.
cleaned and carefully prepared by removing
The horizontal members of the gates contact 'i the barrels at
nails, cleats, straps, anchor plates, and other
points 6 inches from the chimes ) and are held in position by
two vertical members placed in the voids between the barrels.
(2) The principle of the bonded block
5. Fiberboard Containers Loaded by Bonded
method is to build up the load in blocks, in which
Block and Palletized Methods