TM 9-1005-237-23&P
3-4. M9 MULTIPURPOSE BAYONET SYSTEM--MAINTENANCE INSTRUCTIONS (Cont).
SCABBARD BODY ASSEMBLY (Cont)
DISASSEMBLY (Cont)
CAUTION
Do not use wire brush to roughen surface.
b. Roughen surface using abrasive cloth (item 4, app D).
c. Be sure surface to be treated is thoroughly cleaned and dried prior to
application of solid film lubricant.
WARNING
When using solid film lubricant, be sure area is well ventilated.
d. Apply solid film lubricant (item 8, app D) to shiny surfaces. Allow to
dry 16 to 24 hours before handling.
CLEAN/LUBRICATE
NOTE
For use of lubricant, refer to paragraph 2-4.
Wipe scabbard with wiping rag (item 12, app D) and apply a light coat of
lubricant to metal parts.
REASSEMBLY
1. Install cutter assembly (1) on scabbard body assembly (2) as shown.
2. Install two socket head screws (3). Tighten two socket head screws (3).
3-9 (3-10 blank)