Bag hanging from offset horizontal bar of hook.
Bag hanging correctly from horizontal bar directly under
Bag tie twisted too tight. Bag tie is likely to twist in two, or it is possible to 'cut" into certain fabrics by improper
handling of the bag tie.
INSTALLING DUSTUBES IN CELL PLATE:
Collapse the bottom spring into a 'U' shape, as illustrated in figure
Insert the spring through the top of the cell plate hole as in figure
With one hand see that the bottom of the spring is flush with the
bottom of the flange. Release the spring slowly, and allow it to
snap into place. See figure 12. Spring may require a finger
pressure to snap into place for proper seating. In most cases there
is an audible snap when spring is properly seated.
Grasp spring at bottom of tube, folding
together the two sides.