LUBRICATION ORDER
LO 10-3510-208-12
7 FEBRUARY 1991
Supersedes LO 5351020812, 11 August 1988
LAUNDRY UNIT, SINGLE TRAILER MOUNTED
W/CANVAS COVER; ARMY TYPE M532
(EIDAL MDL ELT9T & EDRO MDL EP120LTU)
REFERENCE C9100-IL
Approved for public release; distribution is unlimited
LUBRICANT q INTERVAL
INTERVAL q LUBRICANT
G A A Main
Drive
Pillow
Blocks
Washer
Motor
Slide
OE
100
Piston (See note 3)
Hydro-Sheave Drive
OE
(See note 7.)
Washer Motor Slide G A A
50
Extractor Motor Bearings
G A A (See note 2.)
(See note 1.)
Washer Motor Bearings G A A
Brake Hinge Pin
OE
(See note 2.)
(See note 3.)
Dump Valve Lever
OE
GAA
500
Trunnion
Beering
fitting
(Sea note 3.)
GAA Dump
Valve
Dump Valve Air Piston
OE
PinDoor Hinge Pin
OE
50
(See note 3.)
O E Control Drum
Bearings
(See note 3.)
-
WASHER
EXTRACTOR
-
Tumbler Motor Bearings
50 GO Gear Reducer, Fill and
(No lubrication required)
Fan Motor
Bearings
(No
lubrication required)
Pillow
Block
Bearings
GAA
Trunion Bearings
GAA
(See note 4.)
Door Hinge
OE
(Sea note 3.)
Door
Latch
OE
(See note 3.)
Intervals are based on normal hours of
operation. Reduce to compensate for
abnormal operation and severe condi-
tions. During inactive periods, suffi
cient lubrication must be performed
for adequate preservation.
Clean fittings before Iubricating.
-DRYING
TUMBLER-
Clean parts with SOLVENT, dry-
cleaning, or with OIL, fuel, Diesel.
Dry before Iubricating.
CARD 1 OF 2
