LO10-3530-205-12-2
LUBRICATION ORDER
6 AUGUST 1985
CLOTHING REPAIR SHOP, TRAILER MOUNTED
MODEL: CRS
NSN: 3530-01-133-3494
DARNING SEWING MACHINE
CHANDLER MODEL NO. 678HD
Reference TM10-3530-205-14 and C9100-IL
Intervals (on-condition or hard time) and the related task-
Clean all lubrication points with dry cleaning solvent
hour times are based on normal operation. The task-
(SD), type II or equivalent. Dry before lubricating. The
hour time specified is the time you need to do all the
lowest level of maintenance to lubricate a point is
services prescribed for a particular interval. On-condition
indicated by one of the following:
(OC) oil sample intervals shall be applied unless
changed by Army Oil Analysis Program
(AOAP)
(C)
Operator/Crew
or
(O)
Organizational
laboratory.
Change the hard time interval if your
Maintenance.
lubricants are contaminated or if you are operating the
equipment under adverse operating conditions including
You can help improve this manual. If you find any
longer-than-usual operating hours.
The hard time
mistakes or if you know of a way to improve procedures,
interval may be extended during periods of low activity. If
please let us know. Mail your letter or DA Form 2028
extended adequate preservation precautions must be
(Recommended Changes to Publications and Blank
taken. Hard time intervals will be applied in the event
Forms) direct to: Commander, US Army Troop Support
AOAP
laboratory
support
is
not
available.
Command, ATTN: AMSTR-MPS, 4300 Goodfellow
Blvd, St. Louis, MO 63120-1798. A reply will be
furnished to you.
LUBRICANT INTERVAL
INTERVAL LUBRICANT
Card 1 of 2
