TB 9-2300-280-30
Table 2. Tiedown Parts List
National Stock
Unit of
Quantity
Number
Description
Measure
Authorized
2540-00-782-1467
Kit, Tiedown, P/N 10948047
EA
1
(19207) Composed of:
Template, P/N 10944368
EA
1
(19207)
Retainer, P/N 10945032-1
EA
6
(19207)
2510-00-489-8295
Eye, P/N 10945038
EA
6
(19207)
Bolt, Mach, Hex Head
EA
24
P/N MS90726-32 (96906)
5310-00-880-7746
Nut, Plain, Hex P/N
EA
24
MS51968-5(96906)
5310-00-081-4219
Washer, Flat, P/N
EA
24
MS27183-12 (96906)
NOTE
Anerobic Sealant, NSN 8030-00-148-9833, P/N MIL-S-
46163 (81349) is to be used on bolts, bolt holes, and nuts
every time they are removed and replaced.
4. Installation Procedures.
NOTE
To attach anchors requiring welding, arc weld using fillet
welds approximately one (1) inch in length, covering at
least eight (8) inches of the perimeter of the anchor retainer
as shown in Figure 1. All welding is to be in accordance
with TM 9-237.
a. Procedure for M36, M36A1, M36A2, M36A2C, M36C Trucks.
(1) Remove and retain seven paulin lashing hooks from each side panel of cargo body. Discard 28
rivets.
(2) Remove and retain two reflectors, four screws, and four nuts from each side panel of body.
(3) Fabricate one 1/2 x 3 x 5-1/2 inch spacer from suitable scrap wood or metal.
3
