TM 1-1680-361-10
0008 00-3
OPERATOR MAINTENANCE WORK PACKAGE
Continued
0008 00
HARD BALLISTIC INSERTS/ARMY .50 CALIBER PLATE
CLEANING
1.
Remove the hard ballistic armor inserts from their
encasements/carrier.
2.
Wipe clean with a damp cloth.
3.
Dry with a cloth/paper towel or set to air dry.
CASING AND ENCASEMENT ASSEMBLIES AND .50
CALIBER CARRIER CLEANING
In the following procedures use of the term casing assembly will
include the soft armor casing assembly, the hard armor encasement,
and the .50 caliber carrier.
WARNING
Remove all soft ballistic insert assemblies prior to
washing the casing assembly. Ballistic inserts can be
cleaned with soft brush and water. Hang dry away from
sunlight and direct heat.