TM 10-3510-208-12
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. With the fuel pump operating, turn pressure regulating setscrew until the reading on the pressure gage
indicates 100 psi (7.03 kg per sq cm).
c. Install adjusting screw end capon setscrew.
Figure 4-8. Fuel pump adjustment.
11. BURNER FLAME FAILS
Step l. Check fuel drum supply.
Fill drum with fuel, if empty.
Step 2. Check for clogged fuel lines.
Blow out fuel lines.
Step 3. Check for clogged burner nozzle.
Refer to the following instructions to remove and clean the burner nozzle.
4-16
