TM 10-3510-209-24
Table 2-2. Unit Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
18.
EXTRACTOR STARTS BUT BASKET FAILS TO TURN.
Step 1.
Check for slipping, broken, or missing drivebelt.
a.
If drivebelt is slipping, adjust drivebelt. If drivebelt is
broken or missing replace belt. Refer to paragraph 2-28.
b.
If drivebelt is adjusted correctly and not missing or damaged,
proceed to next step.
Step 2.
Check brake linkage, solenoid, and spring for improper adjustment and
improper function. Refer to paragraph 2-28. Brake should release
during spin cycle.
a.
If brake assembly is improperly adjusted, adjust brake. Refer
to paragraph 2-28.
b.
If brake assembly is correct, notify your supervisor.
WARNING
Components of this laundry are heavy and may be awkward to handle. Use correct
lifting procedures, indicated lifting devices, and/or assistance from other
personnel to avoid injury. Always follow safety instructions when using lifting
devices.
Step 3.
Check for foreign material or clothing wrapped around shaft, above
and below the basket.
a.
If obstruction is found, remove clothing or foreign material.
b.
If basket and shaft are free and problem persists, notify your
supervisor.
19.
EXTRACTOR RUNS ON TOO LONG.
Check for improper function of timer. Observe movement of red pointer during
spin cycle.
a.
If pointer fails to move, notify your supervisor.
b.
If pointer moves normally and problem persists, notify your
supervisor.
2-40
