TM 10-3510-220-24
2-38. WATER HEATER BLOWER MOTOR ASSEMBLY (CONT)
REMOVAL (cont)
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
Install conduit connector (28) in
junction box (26) and secure
with nut (29).
Connect wires (27) injunction
box (26). Remove tags. See
Figure 5, Appendix E.
Install cover plate (24) on back
side of blower assembly and
secure with two screws (25).
Install gasket (15) on blower
housing (16).
Install motor (30) and blower
housing (16) on water vessel
(14) and secure with six
lockwashers (19) and screws
(18).
Install conduit (13) in control
box (11) and secure with nut
(l0).
Connect motor wiring (12) to
control box (11) and remove
tags. See Figure 5, Appendix E.
Install handle assembly (22) on
blower housing (16) and secure
with two lockwashers (21) and
capscrews (20).
2-128
