TM 10-3510-224-13&P
0005 00
2. Place the window section (1) next to the extendable frame (2).
3. Identify large, spindle grommets (3) at the center of each side of the window section (1).
4. Place the large spindle grommets (3) over the ridge spindles (4).
5. Unroll the tent fabric until the fabric reaches the eave spindles (5). Place grommets over each of the four eave
spindles (5).
Placement of ISO Modified End Section.
NOTE
4
1
1
5
3
2
5
5
5
It is important that the ISO Modified End Section be placed on the side of the
frame assembly facing the CSSL. The modified end section connects to the CSSL
at a later stage.
1. Identify ISO Modified End Section (1). Identify large spindle grommet (2) at peak of modified end section. Modified
end section should be stenciled “ISO Bootwall”.
2
1
2. Place large, spindle grommet (2) (see illustration above) located at peak of modified end section (1) over ridge
spindle (3) facing the CSSL.
0005 00-19
