TM 10-3510-226-23
0025 00
TEST-CONTINUED
Test the Audible Alarm
1. Disconnect power at the main circuit breaker.
2. Open PLC enclosure.
3. Strip the heat shrink insulation (Figure 7, Item 5) from the wiring connections.
4. Tag and disconnect wiring from audible alarm (Figure 7, Item 6).
5. Use an ohmmeter to test for continuity.
6. Connect wiring as tagged, and insulate wiring connections with electrical tape.
7. Close enclosure, connect power, and operate PLC. Monitor for normal operation.
5
Figure 7. Test Audible Alarm.
0025 00-7
