TM 10-3510-226-23
0068 00
SERVICE
Bleed the Burner Fuel System
WARNING
Ensure fuel is contained and not allowed to spill or spray into the CBL. Failure to observe
safety precautions may result in a fire, with the possibility of serious injury or death to
personnel.
1. Locate bleed fitting (Figure 6, Item 17) on fuel pump.
2. Open bleed fitting (Figure 6, Item 17) approximately turn.
3. Operate boiler, and allow fuel to discharge from bleed fitting (Figure 6, Item 17) into an approved fuel
container.
4. When fuel stream is solid with no bubbles or spitting, tighten fuel bleed fitting (Figure 6, Item 17).
5. Monitor for normal operation.
17
Figure 6. Bleed the Burner Fuel System.
Change 1
0068 00-12
