stockage are identified with an asterisk in the allowance
Code
Explanation
column.
mined by a GSU to be uneconomically
(2) The quantitative allowances for DS/GS
repairable, they will be evacuated to a depot
levels of maintenance will represent initial stockage for
for evaluation and analysis before final
a 30-day period for the number of equipments
disposition.
supported.
T
High dollar value recoverable repair parts which
are subject to special handling and are
(3) To determine allowances when supporting
issued on an exchange basis. Such repair
more than 100 of these equipments. First, divide the
parts normally are repaired or overhauled at
number of equipments supported by 100by moving the
depot maintenance activities.
decimal two places left; second, multiply the result by
U
Repair parts specifically selected for salvage by
the quantity in the 51-100 density column. Example,
reclamation units because of precious metal
authorized allowance for 51-100 equipments is 40; for
content, critical materials, or high dollar
150 equipments multiply 40 by 1.50 or 60 parts required.
value reusable casings or castings.
g. One-Year Allowance Per 1oo Equipments/
b. Federal Stock Number. This column indicates
Contingency Planning Purposes. This column indicates
the Federal stock number assigned to the item and will
opposite the first appearance of each item the total
be used for requisitioning purposes.
quantity required for distribution and contingency
c. Description. This column indicates the Federal
planning purposes. The range -of items indicates total
item name and any additional description of the item
quantities of all authorized items required to provide for
required. Assembly components and subassemblies are
adequate support of 100 equipments for one year.
indented under major assemblies. The abbreviation
Subsequent appearances of the same item will have the
"w/e", when used as a part of the nomenclature,
letters "REF" in the allowance column. To locate the
indicates the Federal stock number includes all
referenced item, locate the FSN or reference number in
armament, equipment, accessories, and repair parts
the index. The earliest figure and item is the referenced
issued with the item. A part number or other reference
item.
number is followed by the applicable five-digit Federal
h. Illustration. This column is divided as follows:
supply code for manufacturers in parenthesis. Repair
(1) Figure number. Indicates the figure number
parts quantities included in kits and sets are shown in
of the illustration in which the item is shown.
front of the repair part name. Material required for
manufacture or fabrication is identified.
(2) Item number. Indicates the callout number
used to reference the item in the illustration.
d. Unit of Measure (U/M). A two-character
alphabetic abbreviation indicating the amount or
quantity of the item upon which the allowances are
4. Special Information
based, e.g., ft, ea, pr, etc.
a. Identifications of the usable on codes included
e. Quantity Incorporated in Unit. This column
in the description column of this publication are:
indicates the quantity of the item used in the assembly
Code
Used on
group. A "V" appearing in this column in lieu of a
A
Clothing repair shop models
quantity indicates that a definite quantity cannot be
indicated (e.g., shims, spacers, etc.)
Repair parts not symbolized are applicable to all textile
repair shop models.
f. Thirty-Day DS/GS Maintenance Allowances.
b. Repair parts mortality has been based on
Note. Allowances in GS column are for GS
4,000 hours operation per year.
maintenance only.
c. Parts which require manufacture or assembly
(1) The allowance columns are divided into
at a category higher than that authorized for installation
three subcolumns.
Indicated in each subcolumn,
will indicate in the source column the higher category.
opposite the first appearance of each item, is the total
quantity of items authorized for the number of
d. The following publications pertain to the repair
equipments supported. Subsequent appearances of the
shops and their components.
same item will have the letters "REF" in the applicable
TM 9-2330-213-14
Operator, organizational, DS,
allowance column. To locate the referenced item,
and GS maintenance manual
locate the FSN or reference number in the index. The
earliest figure and item number is the referenced item.
Items authorized for use as required but not for initial
iv
