TM 10-3530-207-14
4-9. PMCS TABLE.
Refer to Table 4-1 for Preventive Maintenance Checks and Services.
Explanation of entries:
a.
Item Number Column. Numbers in this column are for reference. When completing DA Form 2404
(Equipment Maintenance and Inspection Worksheet), include the item number for the check/service
indicating a fault. Item numbers also appear in the order that you must do checks and services for the
intervals listed.
b.
Interval Columns. This column tells you when you must do the procedure in the procedure column.
WEEKLY procedures must be done during the seven day operating period. MONTHLY procedures
must be done during the time you are operating or using the equipment for its intended mission.
c.
Location, Item to Check/Service Column. This column provides the location and the item to be
checked or serviced. The item location is underlined.
d.
Procedure Column. This column gives the procedure you must do to check or service the item listed in
the Check/Service column to know if the equipment is ready or available for its intended mission or for
operation. You must do the procedure at the time stated in the interval column.
e.
Not Fully Mission Capable If: Column. Information in this column tells you what faults will keep you
equipment from being capable of performing its mission. If you make check and service procedures
that show faults listed in this column, do not operate the equipment. Follow standard operating
procedures for maintaining the equipment or reporting equipment failure.
4-7
