TM 10-3530-207-14
4-61. POWER BOX ASSEMBLY MAINTENANCE - continued.
Installation.
(1)
Install the cable (1) through the connector (2) and into the electrical box (3). Tighten connector
(2).
(2)
Connect all internal wiring (4) to the receptacles (5).
(3)
Install the three receptacles (5) to the three covers with gasket (6) and secure with six machine
screws (7) and six flat washers (8).
(4)
Install wingnut (9).
(5)
Install three covers (6) and secure with twelve flat washers (10) and twelve machine screws
(11).
4-158