TM 10-3530-207-14
5-30. CLOTHING SEWING MACHINE CLUTCH AND MOTOR ASSEMBLY MAINTENANCE - continued.
(2) Repair of clutch housing - continued.
NOTE
It may be necessary to remove and install locking screw (21) to install brake block (5).
(o) Install brake block (5) into the clutch housing (1) Secure with adjustment bolt (3) and nut (4).
(p) Apply a small amount of grease to clutch sleeve (17).
NOTE
Hole in clutch sleeve (17) must be aligned with hole in the clutch housing (1).
(q) Press clutch housing (1) onto the shaft (2) and clutch sleeve (17).
(r) Install clutch housing (1) to motor with three retaining brackets (20), three lock washers (19)
and three screws (18).
5-77