TM 10-4510-208-13&P
0005 00
Install Guy Line
1. Identify one 19-foot guy line (1) and one tent slip (2) for placement at each of the four eave extender
(3) bases. Identify two 19-foot guy lines (1) and tent slips (2) for placement at the end ridge extender
(4) base.
2. Thread the guy line (1) through one side of the tent slip (2) and then through the brace and around
the pole of the eave (3) extender. Thread two guy lines through the ridge extender (4).
3. Bring guy line (1) through other side of tent slip (2) and tie an overhand knot at end of guy line.
Repeat steps 1 through 4 above for all extenders.
4
1
3
2
0005 00-20
