TM 10-8400-201-23
6-7.
REPAIR - Continued
Table 6-4. Slide Fastener Lengths (Trousers)
Trouser
Front Fly
Leg Opening
Size
Length (In)
Length (In)
X-Small Short
9-¾
17 5/8
X-Small Regular
10-¼
20 5/8
X-Small Long
10-¾
20 5/8
Small Short
10-¼
17 5/8
Small Regular
10-¾
20 5/8
Small Long
11-¼
20 5/8
Medium Short
10-¾
17 5/8
Medium Regular
11-¼
20 5/8
Medium Long
11-¾
20 5/8
Large Short
11-¼
17 5/8
Large Regular
11-¾
20 5/8
Large Long
12-¼
20 5/8
X-Large Short
11-¾
17 5/8
X-Large Regular
12-¼
20 5/8
X-Large Long
12-¾
20 5/8
(12) Pockets. Restitch loose or ripped pockets. Replace missing or defective pockets with new ones using cloth
conforming to MIL-C-44431, Cloth, Plain Weave, Nylon Filament, Lightweight. To attach pockets and flaps to fronts, turn
in edges of pockets ½ inch if not prehemmed. Position pockets and stitch 1/16 to 1/8 inch from folded edge around sides
and bottom, tacking tops. Position breast pocket flap above pockets so line of stitching will lay away from pocket. Stitch
to fronts 3/16 to ¼ inch from overedged edge. Turn flap sown and raise stitch ¼ to 5/16 inch from fold, tacking ends.
Turn pocket opening side of handwarmer pockets on shirt to inside and stitch 3/8 to ½ inch from folded edge for hem.
Position handwarmer pockets, turning seam allowance under and stitch 1/8 to 3/16 inch from folded edges.
(13) Eyelets. Darn eyelet holes with polyester thread as needed.
Change 2
6-9
