TM 10-8400-203-23
12-7. REPAIR AND MAINTENANCE OF HARNESS (NSN 8465-00-753-6548) – Continued
Figure 12-17. Replacement details, adapter portion of handle strap.
(c) Running end portion. Replace damaged running end portion of handle strap with a 76-inch (1.93
m) length of webbing as follows:
1. Remove damaged end by cutting strap along edge of harness.
2. Round one end of replacement webbing, and dip end to a depth of 2 inches (5.08 cm).
3. Position webbing on harness, with straight end extending to leading edge of second
perpendicular web. Sew webbing to harness according to details in Figure 12-18.
(8) Securing strap adapter ends. Replace damaged adapter end of securing strap as in (a) or (b) below.
(a) Cut a piece of webbing 2½ inches (6.35 cm) longer than distance from adapter to leading edge of
second perpendicular web.
(b) Remove damaged end by cutting strap along edge of harness, and remove adapter.
12-27
