TM 10-8400-203-23
15-11. LABELS–Continued
(4) Cleaning instructions.
a.
b.
c.
d.
e.
f.
Remove loose dirt from touch and close fastener and outer cover surface using a cloth or soft
brush.
NEVER USE A STIFF BRISTLE BRUSH.
Wet the vest in the shower or immerse in water. Use warm, not hot water.
Apply toilet soap or detergent to the soiled areas and scrub with a soft brush. Badly soiled areas
may be scrubbed with GI soap. Scrub only long enough to remove soil.
Grease and oil stains may be pre-spotted with a detergent mixture and scrubbed with a soft
brush. If stubborn stain persists, repeat the above procedure.
Rinse the vest with warm water until suds are completely gone.
Hang the vest to dry, away from heat or open flame, by placing a stick or pole through the
armholes.
(5) Turn in your vest to supply points for exchange
When:
a. The outer cover is torn or damaged.
b. The vest is “bunched” and lumps cannot be flattened.
c. The front touch and close fastener will not close completely.
d. The flap is damaged and will not function.
e. The side elastic webbing is torn or frayed.
f. You cannot clean the vest.
g. Any shoulder strap is damaged or does not snap properly.
h. Your vest is hit and damaged by fragments.
15-16
