TM 9-1005-237-23&P
2-10. MIO BAYONET-KNIFE SCABBARD - MAINTENANCE INSTRUCTIONS. (Cont)
INSPECTION/REPAIR (Cont)
5. Inspect metal parts (4) for worn or shiny areas. Worn or shiny areas will be
repaired as follows:
WARNING
Dry cleaning solvent (A-A-711) is flammable and should not be
used near an open flame or in a smoking area.
Use only in
well-ventilated areas. This solvent evaporates quickly and
has a drying effect on the skin. When used without gloves it
may irritate, inflame or cause cracks in the skin.
a. Remove all lubricant from surfaces to be treated with dry cleaning solvent
(item 5, app D). Wear rubber gloves (item 7, app D) and USe a wash pan (item 11,
app D) and brush (item 2, app D) to apply dry cleaning solvent.
CAUTION
Do not use wire brush to roughen surface.
b. Roughen surface using abrasive cloth (item 4, app D).
c. Be sure surface to be treated is thoroughly cleaned and dried prior to
application of solid film lubricant.
WARNING
When using solid film lubricant, be sure area is well-venti-
lated.
d. Apply solid film lubricant (item 8, app D) to shiny or worn surface.
Allow to dry 16 to 24 hours before handling.
6. Repair is by replacement of authorized parts (app C) as required.
NOTE
For use of lubricant, refer to paragraph 2-4.
7. Wipe body with wiping rag (item 12, app D) and apply a light coat of
lubricant.
8. Secure scabbard restraining lace (1) on body (2).
2-22
