01 September 2013
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
2-5. AVIATION HAZARDOUS MATERIALS LIST
authorized for use as long as they conform to the same
speciication. If the particular size container required is not
(AHML). NAVAIR maintains the AHML to assist Navy
and Marine Corps personnel in selecting the NSN for
available or listed, ask the supply department to provide
the next size container under the same speciication.
hazardous materials listed in technical publications.
Refer to the AHML module in the Ship/Shore/Airborne
Aviation Requirements (SSAR) website for the current
2-7. LOCAL PURCHASE. When open purchase is
listing at https://ssar.nswc.navy.mil. A password for this
speciied, include all procurement information, source
application may be obtained via the website.
of supply, and GSA contract number if available.
2-6. CONTAINER SIZE. Consumable materials of
2-8. LOCALREGULATIONS. Prior to the procurement/
a particular speciication are provided in various size
use of any speciied products, comply with all local safety
and environmental requirements, laws, and regulations.
containers. The most commonly used sizes are listed
in this chapter. Other sizes may be available and are
Usable
Speciication/
On
National Stock
Unit of
Intended Use
Nomenclature
Part No.
Number
Issue
AC AV
ABRASIVE CLOTHS
Abrasive Cloth,
ANSI B74.18
Dry sanding of light to moderate corrosion
X
Silicon Carbide,
(supersedes A-A-1200)
products.
Non-waterproof
240 Grit
5350-00-256-5162
RO
(2" x 150')
320 Grit
5350-00-482-5585
RO
Abrasive Cloth,
ANSI B74.18
Wet or dry sanding of light to moderate
X
X
Aluminum Oxide,
(supersedes A-A-1048)
corrosion products.
320 Grit
5350-00-597-5798
PG (25 EA)
Waterproof
(9" x 11" sheets)
Dry sanding of light to moderate corrosion
X
X
Abrasive Cloth,
ANSI B74.18
Aluminum Oxide,
(supersedes A-A-1048)
products. Scuff sanding of avionic boxes prior
Non-waterproof
to painting.
PG (50 SH)
240 Grit (9" x 11" sheets)
5350-00-161-9715
BX (10 EA)
240 Grit (3"x 150' roll)
5350-00-229-3080
5350-00-246-0330
PG (50 SH)
320 Grit (9"x 11" sheets)
320 Grit (2"x 150' roll)
5350-00-187-6289
BX (10 EA)
BX (10 EA)
320 Grit (3"x 150' roll)
5350-00-229-3092
ABRASIVE PAPERS
Abrasive Paper,
ANSI B74.18
Wet or dry sanding of light to moderate
X
corrosion products.
Silicon Carbide,
(supersedes A-A-1047)
240 Grit
5350-00-224-7207
PG (50 SH)
Waterproof
(9" x 11")
280 Grit
5350-01-224-7205
PG (50 SH)
320 Grit
5350-01-224-7203
PG (50 SH)
Abrasive Paper
ANSI B74.18
Dry sanding of light to moderate corrosion
X
products. For use with pneumatic drills or
Discs, Pressure
(supersedes
orbital sanders with a 6" diameter pad.
Sensitive Backing, A-A-2697 Type III)
Silicon Carbide
280 Grit
5345-01-074-9406
RO (250 EA)
(6" dia.)
MISCELLANEOUS HAND ABRASIVES
Aluminum oxide impregnated nylon iber
Abrasive Mats,
A-A-58054
X
X
webbing used for removing corrosion products
Aluminum Oxide,
(supersedes MIL-A-9962)
Non-woven,
and for paint scufing prior to touching up and
Non-metallic
Type I Class 1
feathering edges.
(9" x 11" sheets)
Grade A (Very Fine)
5350-00-967-5089
PG (10 SH)
280-400 grit
Grade B (Fine)
5350-00-967-5093
PG (10 SH)
180 grit
Grade C (Medium)
5350-00-967-5092
PG (10 SH)
100-150 grit
Aluminum Wool
A-A-1044
Removing corrosion from aluminum surfaces.
X
Type II Class 1
5350-00-286-4851
LB
(Medium)