3-18. EXTRACTOR CONTROL BOX
This task covers:
General Safety Instructions
General mechanic's tool set
High voltage is present on this equipment.
Do not perform maintenance with power on.
MOS 633 (Z)
Death or serious injury may result.
Control Box Assembly
TM 10-3510-209-24, Tarp assembly removed.
Paragraph 2-17, Sound deadening panel
Adjust lid free fall.
High voltage is present on this
maintenance with power on. Death
or serious injury may result.
Check lid closure. The lid should not fall
freely from the full open position. The lid
must require downward pressure to close.
Set extractor circuit breaker on electrical
panel to the OFF position.
Remove twelve screws (1), lockwashers
(2), and extractor control panel cover (3)
from rear of unit.