2-14. TARP FRAME ASSEMBLY (CONT)
Repair of broken welds or bent frame parts is performed by Intermediate General Support Maintenance.
If frame assembly is damaged beyond repair, replace with new frame components.
Components are heavy and may be awkward to handle. Use correct lifting
procedures, lifting devices, and/or assistance from other personnel to avoid injury.
Use lifting device or correct lifting procedure and place rear frame (18) into position on trailer (19).
Install 12 bolts (16) and washers (17).
Secure platform anchor assembly (23) onto rear frame (18) using screws (20) and washers (21 and 22).
Position brace (15) on trailer (19) and rear frame (18) and install bolts (10), spacer (12), locknut (11), bolts (13),
and locknut (14). Repeat procedure for brace on opposite side of frame.
If shims were found under front frame (9) during disassembly, replace them as you
Use lifting device and place front frame (9) into position on trailer (19).
2-62 Change 1