2-15. BEAM ASSEMBLY (CENTER AND RIGHT) (CONT)
Welding procedures specified may cause injury if safety precautions are not
followed. Wear protective clothing and eye wear while performing welding
operations. Serious injury could result.
Repair by welding, bending, and cutting metal parts. File sharp edges until
smooth. Repair by replacing damaged hardware and component parts.
If beam assembly is damaged beyond repair, replace with a new beam assembly.
Install right beam (2) in holders (3) and install two
lanyard pins (1).
Repeat step 1 for center beam.
Install upper and lower sound deadening panels (para 2-17).
Install hose basket assemblies (para 2-16).
Position air hoses along center beam and secure with tiedown straps.
Install left beam, struts, ladder, and tarp assembly (TM 10-3510-209-10).
Change 2 2-65