TM 10--3510--221--24
0131 00--2
INLET DAMPER AIR CYLINDER
REPLACEMENT -- Continued
0131 00
4
8
9
7
2
1
4
10
1
3
5
3
6
12
INSTALLATION
1. Apply anti--seizing tape to threads of flow control valves (10).
2. Install flow control valves (10) into new air cylinder (2).
3. Thread thread jam nut (9) and rod adapter (8) on to piston (7).
4. Adjust position of rod adapter (8) as follows:
a. Extend piston (7).
b. Thread rod adapter (8) in or out to achieve previously recorded dimension.
c. Tighten jam nut (9).
5. Insert air cylinder (2) between mounting bracket (5) and inlet damper (6).
6. Install clevis pins (4) to secure air cylinder (2) to mounting bracket (5) and inlet damper (6).
7. Install hairpins (3) to secure clevis pins (4).
8. Connect air lines (1) to air cylinder (2) as tagged.
9. Adjust flow control valves (WP 0133 00).
END OF WORK PACKAGE