5-64. STOWAGE BOX ASSEMBLY MAINTENANCE.
This task covers:
INITIAL SETUP :
Shop Equipment (Appendix B, Item 2)
Detergent, General Purpose (Appendix F,
Riveting Tool Set (Appendix B, Item 4)
Welding Set (for Aluminum)
Paint Spraying Equipment
Aluminum Sheet Metal (Patches)
Primer, Zinc Chromate (Appendix F,
Stowage Box Removed From Cabinet (para 2-8)
Paint, Olive Drab (Appendix F, Item 3)
Sealing Compound (Appendix F, Item 7)
(1) Inspect for cracked or broken welds.
(2 Inspect for rust, corrosion and damage.
(3) Inspect for dents or hole in stowage box.
(1) Clean the door with a solution of detergent (Appendix F, Item 11) and water.
(2) Rinse thoroughly with clean water.
(3) Allow to dry.
Repair. Repair is limited to the following.
(1) Repair of Dents.
(a) Push out all dents. If damage is too great to push out, treat as if it were a hole.
(b) Sand area with sandpaper and refinish with primer (Appendix F, Item 6) and olive drab paint
(Appendix F, Item 3). Refer to TM 43-0139 for proper painting instructions. Allow paint to