NAVAIR 01-1A-509-4
01 September 2013
TM 1-1500-344-23-4
Table 2-5. Corrosion Preventive Compounds
Usable
Speciication/
Unit of
National Stock
On
Nomenclature
Intended Use
Part No.
Issue
Number
AC AV
Class I: high VOC materials.
Corrosion
MIL-PRF-16173
Class II: low (<340 g/l) materials.
QT
8030-00-062-6950
Preventive
Class I Grade 1
(Hard ilm)
GL
Compound,
8030-00-231-2345
X
Grade 1: Use for long term protection
Solvent Cutback,
of metal surfaces against corrosion
8030-01-396-5731
Cold Application
Class II Grade 1
PT
with or without covering (indoors or
(Hard ilm, low VOC)
8030-01-396-5732
GL
CN (5 GL)
outdoors).
8030-01-347-0970
X
Grade 2: Use for protection of metal
CN (11 OZ)
8030-00-118-0666
Class I Grade 2
(Soft ilm)
QT
surfaces against corrosion during
8030-01-149-1731
rework or storage, and extended
GL
8030-00-244-1297
CN (5 GL)
indoor protection of interior or exterior
8030-00-244-1298
surfaces without the use of barrier
DR (55 GL)
8030-00-244-1295
materials. Can be used for limited
outdoor protection where temperatures
GL
Class II Grade 2
8030-01-534-5768
(Soft ilm, low VOC)
X
X
are not extreme.
Grade 4: Use for protection of metal
PT
8030-00-903-0931
Class I Grade 4
GL
surfaces against corrosion during
(Transparent, non-
8030-00-062-5866
tacky soft ilm)
indoor storage, limited outdoor
preservation, and fastener installation.
Use on control cables, fasteners, bare
PT
8030-01-396-5738
Class II Grade 4
metal areas, or anywhere temporary
GL
8030-01-396-5743
(Transparent, non-
tacky soft ilm, low
(30 days or less) protection is needed.
CN (5 GL)
8030-01-347-0972
VOC)
Corrosion
MIL-DTL-85054
Temporary repair of small paint
X
X
Preventive
Type I (Aerosol)
8030-01-347-0980
CN (14 OZ)
damaged areas (chips, scratches,
Compound,
or cracks). Intended for use on non-
Water Displacing, Type II (Bulk form)
8030-01-347-0983
BT (32 OZ Sprayer) moving parts not requiring a lubricated
Transparent, for
8030-01-347-0981
QT
surface, such as fasteners, seams,
Low and High
8030-01-347-0982
CN (5 GL)
access panels, joints, unpainted metal.
Temperatures
Type II: may be applied by dipping,
X
X
Corrosion
MIL-PRF-81309
spraying, brushing or from aerosol
Preventive
Type II
Class 1 (Non-pressurized) 8030-00-213-3279
GL
containers. Suitable for use on any
Compound,
8030-00-262-7358
CN (5 GL)
metal surface for indoor and short term
Water Displacing,
outdoor protection where surfaces can
8030-00-524-9487
DR (55 GL)
Ultra-Thin Film
be re-coated when required.
8030-01-573-5154
QT
Class 1 (NAVGUARD)
8030-01-573-5158
GL
CAUTION
MIL-PRF-81309 should not be used
around liquid oxygen ittings.
8030-00-938-1947
CN (16 OZ)
Class 2 (Aerosol)
8030-01-600-1264
BX (12 EA)
Class 2 (NAVGUARD)
Type III: for use on avionic equipment,
electrical connector plugs, and contact
points.
Type III
Class 1 (Non-pressurized) 8030-01-347-0978
GL
8030-01-600-1718
QT
Class 1 (NAVGUARD)
8030-01-600-1719
GL
Class 2 (Aerosol)
8030-00-546-8637
CN (16 OZ)
Class 2 (NAVGUARD)
8030-01-600-1265
BX (12 EA)
