01 September 2013
NAVAIR 01-1A-509-4
TM 1-1500-344-23-4
Table 2-10. Paint Removers
Usable
Speciication/
National Stock
Unit of
On
Intended Use
Nomenclature
Part No.
Number
Issue
AC
AV
Ideal for use in localities where
Remover, Paint, TT-R-2918
X
X
No Hazardous Air Type I
8010-01-485-2312
CN (1 GL)
methylene chloride (e.g. MIL-R-81294)
Pollutants (HAPs)
8010-01-441-6143
CN (5 GL)
based paint removers are restricted or
prohibited. Requires a little longer dwell
Type II
8010-01-483-4367
CN (1 GL)
time to lift coatings from parts than
MIL-R-81294.
Type I removes epoxy & polyurethane
MIL-R-81294
Remover,
X
X
paints.
8010-00-142-9273
PT
Type I Class 1
Paint, Epoxy,
Polysulide, and
Type II removes polyurethane paints.
8010-00-181-7568
GL
Type III removes polysulide sealants.
CN (5 GL)
8010-00-926-1488
Polyurethane
Class 1 contains phenolics &
DR (55 GL)
8010-00-926-1489
Systems
chromates.
CN (5 GL)
Class 2 is nonphenolic but contains
8010-01-261-6067
Type I Class 2
chromates.
Class 2A does not contain phenolics or
DR (55 GL)
8010-01-334-6751
Type II Class 3
chromates.
GL
Class 3 contains limited phenolics &
8010-01-380-3298
Type III Class 2A
chromates.
Carbon
AMS-C-19853
X
(supercedes MIL-C-19853)
Removing
Compound,
Type I Class 2
6850-00-543-7801
CN (5 GL)
Removes carbon and paint from engine
(For Use in
6850-00-550-7453
DR (55 GL)
components. Type I contains phenolics.
Agitated Tanks)
Use Type II where phenolic paint
Type II Class 2
6850-01-138-7551
CN (5 GL)
removers are NOT allowed.
6850-01-138-7550
DR (55 GL)
NOTE
This paint remover is methylene
chloride based.
Remover, Paint,
MIL-PRF-83936
8010-01-374-4337
DR (55 GL)
Use for immersion tank paint stripping
X
Tank Type
at Intermediate and Depot level
maintenance activities. Alternate for
AMS-C-19853.
Table 2-11. Paint Thinners
Speciication/
Usable
National Stock
Unit of
Nomenclature
Intended Use
On
Part No.
Number
Issue
AC AV
Thinner,
MIL-T-81772
Use to reduce aircraft paint coatings.
X
X
Aircraft Coatings
Type I (Polyurethane
8010-00-181-8080
GL
Type I may be used to prep aircraft
Thinner)
8010-00-181-8079
CN (5 GL)
surfaces prior to painting, but check
with local environmental ofice for
8010-00-280-1751
DR (55 GL)
concurrence before using this material
as a cleaner/degreaser. Do not use on
Type II (Epoxy Thinner)
8010-01-200-2637
GL
8010-01-212-1704
CN (5 GL)
polycarbonate or acrylic materials.
8010-01-168-0684
DR (55 GL)
8010-01-165-6760
GL
Type III (Acrylic and
Alkyd Thinner)
Thinner,
A-A-3007
8010-01-441-5938
QT
Use for thinning varnish.
X
Alkyd Paints and
8010-01-441-5940
GL
CN (5 GL)
CAUTION
Varnishes
8010-01-441-5941
8010-01-441-5942
DR (55 GL)
Do not use in lacquers.
