TM 10-3510-208-12
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Figure 4-20. Gear reducer, removal and installation.
Step 4. Check for a cracked, broken, or worn cylinder drive motor coupling.
Refer to figure 4-19 and replace the coupling.
RADIO INTERFERENCE SUPPRESSION
Section VI.
4-12. General Methods Used to Attain Proper
resistors. For general information on radio in-
Suppression
terference suppression, refer to TM 11-483.
Essentially, suppression is attained by providing
4-13. Interference Suppression Components,
a low-resistance path to ground for stray currents.
Location and Replacement
The methods used to include shielding the ignition
a. Refer to figure 4-12 for the location and
and high-frequency wires, grounding the frame
with bonding straps, and using capacitors and
4-29
