TM 10-3510-206-12
1. Nut
4. Lockwasher 6. Hook, chain
7. Bin
2. Flatwasher 5. Chain
3. Bolt
Figure 4-25. Drain bin removal and installation
(1) Inspect the drain bin for damage.
b. Cleaning.
(2) Replace a damaged drain bin.
d. Installation. Position the drain bin (7, fig.
Clean all parts in a well-ventilated area.
4-25) onto the trailer and secure with chain hook
Avoid inhalation of solvent fumes and
prolonged exposure of skin to cleaning
(6), chain (5), lockwashers (4), bolts (g), flat-
washers (2) and nuts (1).
solvent. Wash exposed skin thoroughly.
Dry cleaning solvent (Fed. Spec. P-D-680)
4-21. Storage Cylinder Box
used to clean parts is potentially dangerous
a. Removal.
to personnel and property. Do not use near
(1) Refer to paragraph 4-19 and remove the
open flame or excessive heat. Flash point
drain bin.
of solvent is 100 to 136F. (38 to 59C. ).
(2) Remove the bolts (1, fig. 4-26) and lock-
Clean the drain bin with cleaning solvent, Fed.
washers (2) securing the storage cylinder box (3) to
Spec. P-D-680, and dry thoroughly.
the trailer.
c. Inspection and Replacement.
4-34
