TM 10-3510-208-12
b. Disassembly.
(1) Remove screws (1, fig. 4-63) and remove
the cover (2) and gasket (3) from the switch box
(11).
(2) Remove screws (4) and remove the switch
assembly (5) from the switch box.
(3) Remove the back cover (6) from the
compressor starter switch (9).
(4) Remove screws (7) and remove the thermal
release heaters (8) from the compressor starter
switch (9).
(5 ) Remove the pipe plug (10) from the switch
box (11).
TS 10-3510-206-12/4-62
1. Nut
2. Screw
3. Switch
Figure 4-62. Compressor starter switch, removal and installation
4-84
